|
Dry Moly Lube |
Hazard Statements
Extremely flammable aerosol. Pressurized container: May burst if heated. Contains gas under pressure; may explode if heated. May be fatal if swallowed and enters airways. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs (brain, nervous system) through prolonged or repeated exposure. Suspected of damaging the unborn child. Harmful to aquatic life. Harmful to aquatic life with long lasting effects
Precautionary Statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Do not apply while equipment is energized. Do not pierce or burn, even after use. Extinguish all flames, pilot lights and heaters. Vapors will accumulate readily and may ignite. Do not breathe gas. Use only with adequate ventilation; maintain ventilation during use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Do not breathe mist or vapor. Wear protective gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling. Avoid release to the environment.
Manufacturer information
Name
CRC Industries, Inc.
Phone
215-674-4300
Address
885 Louis Dr.
Warminster, PA 18974
PICTOGRAMS
HMIS
| HEALTH |
2 |
| FLAMMABILITY |
4 |
| PHYSICAL HAZARD |
0 |
| PERSONAL PROTECTION |
B |
NFPA
2
4
0
El Camino Community College District
Local data
SKU #
