POLYTECH -- SS-214  -- 6850-00N060873
<pre>=====================  Product Identification  =====================

Product ID:SS-214
MSDS Date:07/27/1993
FSC:6850
NIIN:00N060873
=== Responsible Party ===
Company Name:POLYTECH
Address:2520 SAN FERNANDO
City:LOS ANGELES
State:CA
ZIP:90065
Country:US
Info Phone Num:213-223-3232
Emergency Phone Num:404-422-2071
Preparer's Name:ES/KD
CAGE:0FWB4
=== Contractor Identification ===
Company Name:POLYTECH
Address:2520 SAN FERNANDO ROAD
Box:City:LOS ANGELES
State:CA
ZIP:90065
Country:US
Phone:213-223-3232/800-421-9402
CAGE:0FWB4

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE (SARA 313) (CERCLA)
CAS:67-64-1
RTECS #:AL3150000
OSHA PEL:1000 PPM
ACGIH TLV:750PPM/1000STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:HEXANE (CERCLA)
CAS:110-54-3
RTECS #:MN9275000
OSHA PEL:500 PPM
ACGIH TLV:50 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:BLEND OF PROPANE AND ISOBUTANE (CONTAINING IGREDIENTS 4 AND
    5)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PROPANE, 2-METHYL-; (ISOBUTANE)
CAS:75-28-5
RTECS #:TZ4300000
OSHA PEL:800 PPM (MFR)
ACGIH TLV:800 PPM (MFR)

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: EXCESSIVE
    INHALATION OF VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION,
    DIZZINESS, WEAKNESS, NAUSEA, HEADACHE, POSSIBLE UNCONSCIOUSNESS OR
    ASPHYXIATION. EYES: IRRITATION. SKIN: I RRITATION DUE TO DEFATTING
    OF SKIN. INGESTION: POSSIBLE CHEMICAL PNEUMONITIS IF ASPIRATED INTO
    LUNGS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CHRONIC: EXCESSIVE INHALATION OF
    HEXANE MAY CAUSE NERVE DAMAGE.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE EXISTING EYE, SKIN,
    OR UPPER RESPIRATORY CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. IF IRRITATED,
    SEEK MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. IF
    IRRITATED, SEEK MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR.
    RESUSCITATE  IF NECESSARY. GET MEDICAL ATTENTION. INGESTION: DO NOT
    INDUCE VOMITING. DRINK TWO LARGE GLASSES OF WATER. GET IMMEDIATE
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:EXTREMELY FLAMM
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . USE WATER FOG TO COOL CONTAINERS TO PREVENT
    RUPTURING AND EXPLODING CONTAINERS.
Unusual Fire/Explosion Hazard:DO NOT EXPOSE AEROSOLS TO TEMPERATURES
    ABOVE 130F OR THE CONTAINER MAY RUPTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH SUITABLE MEDIUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT PUNCTURE OR INCINERATE
    CONTAINERS. DO NOT STORE AT TEMPERATURES ABOVE 130F.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN. AVOID FOOD
    CONTAMINATION. AVOID BREATHING VAPORS. REMOVE IGNITION SOURCES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF VAPOR CONCENTRATION EXCEEDS TLV, USE
    NIOSH/MSHA APPROVED RESPIRATOR IN POSITIVE PRESSURE MODE.
Ventilation:ADEQUATE VENTILATION TO KEEP VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE HANDLING FOOD.
    REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Pres:80 PSIG
Spec Gravity:0.853 (H*2O=1)
Solubility in Water:PARTIAL
Appearance and Odor:STRAW COLORED LIQUID WITH KETONE SOLVENT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OPEN FLAME, WELDING ARCS, HEAT, SPARKS.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR LANDFILL ACCORDING TO LOCAL,
    STATE, AND FEDERAL REGULATIONS. DO NOT FLUSH TO SEWER. AEROSOL CANS
    WHEN VENTED TO ATMOSPHERIC PRESSURE THROUGH NORMAL USE, POSE NO
    DISPOSAL HAZARD.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.