MACKLANBURG-DUNCAN -- SILICONE RUBBER SEALANT  -- 8030-00F013145
<pre>=====================  Product Identification  =====================

Product ID:SILICONE RUBBER SEALANT
MSDS Date:06/16/1988
FSC:8030
NIIN:00F013145
=== Responsible Party ===
Company Name:MACKLANBURG-DUNCAN
Address:4041 NORTH SANTA FE
Box:25188
City:OKLAHOMA CITY
State:OK
ZIP:73118
Info Phone Num:(405) 528-4411
Emergency Phone Num:(405) 528-4411
CAGE:82464
=== Contractor Identification ===
Company Name:MACKLANBURG-DUNCAN
Address:4041 N SANTA FE
Box:City:OKLAHOMA CITY
State:OK
ZIP:73118-0188
Country:US
Phone:800-654-8454 / 405-528-4411
CAGE:82464

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYSILOXANE
CAS:70131-67-8
Fraction by Wt: 85%

Ingred Name:ETHYLTRIACETOXYSILANE
CAS:17689-77-9
Fraction by Wt: 5%
ACGIH TLV:10 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: UNCURED PRODUCT MAY CAUSE
    IRRITATION. INHALATION: IRRITATE RESPIRATORY TRACT, HEADACHE &
    BREATHLESSNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: UNCURED PRODUCT MAY CAUSE IRRITATION.
    INHALATION: IRRITATE RESPIRATORY TRACT, HEADACHE OR BREATHLESSNESS.
Medical Cond Aggravated by Exposure:RESPIRATORY

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS & CONTACT PHYSICIAN. SKIN:
    WASH AFFECTED AREAS W/SOAP & WATER. INGESTION: DON'T INDUCE
    VOMITING, CONTACT PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:>400F
Lower Limits:5.4%
Upper Limits:16%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS IN POSITIVE
    PRESSURE MODE/FULL PROTECTIVE GEAR SHOULD BE WORN.
Unusual Fire/Explosion Hazard:ACETIC ACID IS FORMED DURING CURING.
    IRRITATING OR TOXIC GASES/AEROSOLS MAY BE PRODUCED DURING BURNING.
    ACETIC ACID MAY IGNITE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE INTO CONTAINERS/DISPOSE OF IN
    ACCORDANCE W/LOCAL, STATE, FEDERAL REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES, SPARKS,
    OR FLAME. STORAGE  40/120F. KEEP AWAY FROM CHILDREN.  AVOID
    BREATHING VAPORS, CONTACT W/SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE ONLY IN WELL VENTILATED AREA. WEAR NIOSH
    APPROVED RESPIRATORY IF TLV OF ACETIC ACID IS EXCEEDED.
Protective Gloves:CLOTH
Eye Protection:NORMAL PRECAUTION
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:500F
Vapor Pres:NONE
Spec Gravity:1.1-1.5
pH:/K
Evaporation Rate &amp; Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:VINEGAR ODOR, CLEAR OR PIGMENTED SEMI-SOLID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALI
Stability Condition to Avoid:HEAT, SPARKS, FLAMES, STORAGE  40 & 120F.
Hazardous Decomposition Products:CO2, CO, SILCON DIOXIDE, ACETIC ACID,
    TOXIC GASES & AEROSOLS

====================  Disposal Considerations  ====================

Waste Disposal Methods:SANITARY LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.